From October 23rd to 25th, the ancient city of Shaoxing ushered in a high-profile event for the new energy industry - the 20th China Renewable Energy Conference and New Energy Technology and Products Exhibition was successfully held at the Shaoxing International Convention and Exhibition Center.

As a deep cultivator of front-end process equipment for new energy materials, Yifu Intelligent appeared at this conference in the form of a booth to discuss new paths for materials and equipment under the "Green Energy·Innovation Leadership" with academicians and experts, scientific research institutions and leading enterprises in the industry chain in the fields of photovoltaics, energy storage, hydrogen energy, wind energy, biomass energy, geothermal energy, ocean energy and other fields.

A system-level dialogue on renewable energy and new energy technologies

This conference is hosted by the China Renewable Energy Society and organized by the Shaoxing Institute of New Energy and Molecular Engineering of Shanghai Jiao Tong University. With the theme of "Green Energy·Innovation Leadership", it covers academic frontiers, technological innovation, industrial development and international trends.

During the three days, the conference not only set up plenary sessions and youth forums, but also simultaneously held more than ten professional branches including photovoltaics, biomass energy, thermal utilization, wind energy, photochemistry, hydrogen energy, solar architecture, ocean energy, natural gas hydrate, power generation and grid connection, energy storage, geothermal, solar thermal power generation, integrated systems, and renewable energy power.

The new energy technology and product exhibition at the same time put "technology - equipment - materials - scenes" in the same space for dialogue:

• Photovoltaics and energy storage are moving toward systematic synergy

• Hydrogen energy, sodium electricity, and solid-state batteries are accelerating industrialization

• New materials such as lithium iron phosphate, silicon-carbon anodes, carbon nanotubes, and graphene slurries put forward more stringent requirements for dispersion and grinding

• Competition in production lines has shifted from "can it be made?" to "can it be made stably, with low consumption, and scalable?"

The next step in new energy is not only the material formula, but also the process strength of the front-end equipment, and this is the battlefield that Yifu Intelligent is most familiar with.

Yifu Booth: Put the “process pain points” on the table and talk

At this Shaoxing exhibition, Yifu Intelligent participated in the exhibition in the form of a booth. The on-site exchanges focused on the wet grinding and dispersion process of new energy battery materials, focusing on the following:

🔹 Lithium iron phosphate / lithium iron manganese phosphate grinding solution

For high solid content and high viscosity systems, it solves mass production pain points such as wide particle size distribution, batch drift, shutdown and screen cleaning.

🔹 Silicon carbon / hard carbon / porous carbon ultra-fine grinding solution

Covers the process connection of anode materials from research and development to pilot testing to large-scale manufacturing.

🔹 Carbon nanotube/graphene conductive slurry dispersion system

Focus on agglomeration control, metal foreign matter control, slurry stability and continuous operation capability.

🔹 Solid-state battery material grinding-dispersion process package

Provides replicable equipment and process ideas from laboratory research and development to production line scale-up.

🔹 LPM Vertical Nano Ceramic Sand Mill / NCP Rod Pin Sand Mill / NCT Turbine Sand Mill

Demonstrate Yifu’s full range of capabilities in vertical, rod pin, turbine, laboratory type to 10,000-ton production line equipment.

At the booth, the Yifu team communicated one-on-one with the process leaders of material companies, battery cell factory supply chain representatives, and researchers from scientific research institutes. These three days in Shaoxing have made us more convinced:

The competition in new energy is not only on the resource side and the battery side, but also on the process of "whether materials can be stably produced."

"Process Partner"

of Renewable Energy After new energy materials enter the stage of "nanoization, continuity, low energy consumption, and high consistency", grinding and dispersing equipment is no longer a supporting type of work, but a core node that determines material performance and manufacturing costs.

The differentiation of Yifu Intelligent lies not in "longer equipment list" but in the following five core advantages:

① Better understanding of materials

From LFP, silicon carbon, hard carbon, sodium electrical materials to solid electrolytes, Yifu does not speak by "machine model", but by "material system" for process matching.

② The same principle of amplification, no need to re-adjust the machine

LPM series vertical nano-ceramic sand mill covers 1L-1000L/2000L, the laboratory small test and mass production line use the same principle of amplification, reducing the risk of converting pilot test to mass production.

③ Never block material, suitable for continuous manufacturing

No screen / special centrifugal separation structure, suitable for high solid content and high viscosity systems, reducing shutdown and cleaning, and meeting the needs of new energy material continuous production lines.

④ Fineness, appearance and energy consumption are managed together

0.05–0.3mm tiny grinding beads are used reliably and have a narrower particle size distribution; they are “finer” while minimizing crystal breakage and secondary agglomeration.

⑤ From stand-alone machine to EPC system delivery

Yifu has delivered 30,000+ stand-alone machines and 500+ engineering projects, and its business has shifted from equipment sales to grinding system EPC comprehensive services: process design, equipment selection, production line integration, installation and commissioning, and after-sales operation and maintenance integrated delivery.

What Yifu sells is not a sand mill, but a "process partner" for renewable energy - making the material yield rate determined from the front end.

Shaoxing ends, cooperation in the production line begins

The 20th China Renewable Energy Conference and New Energy Technology and Product Exhibition has come to an end, but the upgrading of new energy material technology has just entered the deep water area.

For Yifu, the exhibition is not the end, but the starting point of "bringing customer production line problems back to the factory":

• Bring back samples for material testing;

• Bring back production line sketches to calculate energy consumption and yield;

• Bring back process pain points to iterate on separation structures, media grading and intelligent control systems.

In the future, Yifu will still follow a very simple path:

Do not chase the hottest concepts, but only accompany new energy materials to complete the hardest journey - the exhibition can come to an end, but the process creation with customers will not end.